- Increase the sidebar and chatlist width on screens bigger than 2xl
- Fix background of the copilot sidebar
- Increase the breakpoint for hiding chatlist from 1024 to 1200
Added the possibility to mark as a single conversation in the API type
inbox. This allows the conversation builder to search for the last
conversation.
I thought about searching for the last conversation with created_at:
desc order, as is done in some channels... but I didn't change the way
the conversation is searched.
Fixes: #7726
Co-authored-by: Sojan Jose <sojan@pepalo.com>
This PR resolves the issue with updating the profile picture in the profile settings.
**Cause of issue**
The issue can be reproduced with the old `ProfileAvatar.vue` component.
While the exact reason is unclear, it seems related to cases where the
file might be `null`.
**Solution**
Replaced the old `ProfileAvatar.vue` with `Avatar.vue` and tested it. It
works fine. I’ve attached a loom video below.
Fixes https://linear.app/chatwoot/issue/CW-3768/profile-picture-bug
Co-authored-by: Pranav <pranav@chatwoot.com>
Co-authored-by: Pranav <pranavrajs@gmail.com>
### The problem
Writing in the text editor can be very frustrating, the reason is that
the editor had a debounced save method which would push the article to
the backend and update the current state. This however is a bad idea,
since the can take anywhere between 100-300ms depending on network
conditions.
While this would be in progress, the article is still being edited by
the user. So at the end of the network request, the state returned from
the backend and the current state in the editor is diverged. But since
the update happens anyway, the editor would prepend older context.
```
Time -->
User Action: [Edit 1] ---> [Edit 2] ---> [Edit 3]
Backend Save: Save Req (Edit 1) ----> Response (Edit 1)
Resulting Editor State: [Edit 3] + [Edit 1] (Outdated state prepended)
```
### The solution
The solution is to unbind the article from the backend state, ensuring
that the article editor is the source of truth and ignoring the
responses. This pull request does this by adding an asynchronous save
functionality. The changes include adding a new `saveArticleAsync` event
and ensuring that the local state is not updated unnecessarily during
asynchronous saves.
```
Time -->
User Action: [Edit 1] ---> [Edit 2] ---> [Edit 3]
Backend Save: Save Req (Edit 1) ----> Response (ignored)
Resulting Editor State: [Edit 3] (Consistent and up-to-date)
```
Added the following two debounced methods
These complementary debounce methods prevent unnecessary re-renders
while ensuring backend is in sync. `saveArticleAsync` preserves the
editor as the source of truth, while `saveArticle` manages periodic
state updates from the backend with a delay large enough to safely
assume that the user has stopped typing
Method | Delay | Behavior
-- | -- | --
`saveArticleAsync` | 400ms | Sends data to backend and ignores the
response
`saveArticle` | 2.5s | Sends data and updates local state with the
backend response
### How to test
1. Remove the following line
dc042f6ddc/app/javascript/dashboard/components-next/HelpCenter/Pages/ArticleEditorPage/ArticleEditor.vue (L64)
1. Update the latency here to 400 (P.S. the diff shows the latency to be
600, but that was added as a stop-gap solution)
dc042f6ddc/app/javascript/dashboard/components-next/HelpCenter/Pages/ArticleEditorPage/ArticleEditor.vue (L51)
1. Set the browser network latency to Slow 3G or 3G
1. Start writing on the editor, try fixing typos with backspace or
moving around with the cursor
---------
Co-authored-by: Sivin Varghese <64252451+iamsivin@users.noreply.github.com>
Co-authored-by: Pranav <pranav@chatwoot.com>
Ensures users are seamlessly directed to the first available menu item upon opening a group, improving UX by reducing unnecessary clicks. This change enhances navigation flow within groups.
Co-authored-by: Pranav <pranavrajs@gmail.com>
This PR has the initial version of the new sidebar targeted for the next major redesign of the app. This PR includes the following changes
- Components in the `layouts-next` and `base-next` directories in `dashboard/components`
- Two generic components `Avatar` and `Icon`
- `SidebarGroup` component to manage expandable sidebar groups with nested navigation items. This includes handling active states, transitions, and permissions.
- `SidebarGroupHeader` component to display the header of each navigation group with optional icons and active state indication.
- `SidebarGroupLeaf` component for individual navigation items within a group, supporting icons and active state.
- `SidebarGroupSeparator` component to visually separate nested navigation items. (They look a lot like header)
- `SidebarGroupEmptyLeaf` component to render empty state of any navigation groups.
----
Co-authored-by: Pranav <pranav@chatwoot.com>
Co-authored-by: Pranav <pranavrajs@gmail.com>
When moving form using Gmail Legacy auth to using OAuth, we need the
email address that will be used to connect. This is because we need to
store this email address in the cache and reuse when we get the callback
to find the associated inbox.
However there are cases where the imap login might be
`support@company.com` and the email used to communicate will be
`contact@company.com` (Probably an alias) In that case, we need to send
the correct email address to Chatwoot when re-authenticating
At the moment, we used the inbox email. This PR adds a check that
defaults to to `imap_login` if that is available and imap is enabled
This PR also fixes an unrelated problem where the email inbox creation
flow was not working
---
Tested it, it is working correctly
On production on multiple instances it may happen that the UI is
rendered in correctly, with a lot of options in the sidebar not
available. On further investigation I found out that the feature flag
checks were disabling multiple of those, and also we could see many
correlated errors that pointed towards missing information.
So, there were two problems here
1. The `vuex-router-sync` was not very reliable in some cases
2. In `App.vue` the watch on `currentAccountId` didn't always trigger.
## Fix Tested on Staging
Basically tried to reload the page ~50 times with cache enabled,
disabled, throttling, navigating different pages.
https://www.loom.com/share/1bb27294aa364ac4acfb647780d6385a?sid=87e31330-8cb7-4ded-8616-5e95e2ae3516
<details><summary>
#### What I thought was the fix
</summary>
<p>
### My chain of actions
Replacing vuex-router-sync at first worked fine, but then I saw it was
still failing in some cases, I assumed (I was half-correct tho) that the
rendering of the `App.vue` and syncing of the route to the store was not
happening in a synchronous pattern. So I decided, let's not rely on the
store when the route is directly available in the App context.
Following this, I refactored `useAccount` composable to use `useRoute`
directly, instead of the store, and then replaced the getter inside
`App.vue`. What this did was surface the issue but more consistently 🤯
I saw the watcher, added some console logs, and turns out it was not
getting triggered in all those cases. So I added an `immediate` to it.
And viola, it works!
At the moment, this is deployed to staging and seems to be working
correctly. But we still need to verify it for sure, since how this issue
was surfaced is still a mystery. All we know is that it shows up when
the widget is also loaded alongside the app (if it loads before or after
the app, it works fine)
### What about the route in the store?
Well I have used the `route` usage there with fallback to the store
state. Since Vuex exists in the app context, the route should always be
available to it. But after today I have lost all trust in JavaScript and
will worship rails until end of my life, so I added that in a
`try-catch` block, logged the error to Sentry
</p>
</details>
## Here's the real fix
If you read the explanation I wrote earlier, I thought I fixed the
issue, but then the chat list navigation completely broke. So I removed
the custom route sync implementation and added the original package
back. Turns out the vuex-router-sync earlier was placed after the app
was initalized, however for it to work, the vue app context is not
required. And it's best to run it before the app is even bootstrapped,
so I added it back and placed it correctly.
So the following changes fixes this problem
1. Hoisting the `sync` function call to before we call `createApp` this
ensures that the stores and route hooks are in place before even the app
is created
2. Ensuring the `initializeAccount` is run immediately when watching
`currentAccountId`
4. Source `currentAccountId` for critical top of the tree components
directly from the route instead of the store
There were two warnings showing up on new teams page
1. `errorMessage` prop was getting invalid value, this was because were
short circuting the error message using `&&`, fixed it by using ternary
operator
2. `vue-i18n` has deprecated [rails
syntax](https://vue-i18n.intlify.dev/guide/essentials/syntax#rails-i18n-format),
fixed that warning by removing `%` before `{}` for interpolation
> Note: the `vue-i18n` deprecation needs to be handled, but we can do it
later
When Vue 3 is used with options API, any assignment to `this.<something>` is converted to a Proxy before assignment. This is fine as long as we are in the options context, problem arises when we access this in a `composable` any mutations on the object doesn't behave correctly as expected, this PR fixes that by moving the `automation` object inside the composable and using it in the options.
> Another option to fix such an issue is to make the object non-reactive, like done in places where we have `editorView`, but that wasn't viable here
---------
Co-authored-by: Muhsin Keloth <muhsinkeramam@gmail.com>
This PR makes the following changes
1. Update v-model bindings for components using the old `value` prop and `input` event method
2. Remove components that were not used anywhere
---------
Co-authored-by: Muhsin Keloth <muhsinkeramam@gmail.com>
Vue i18n would automatically merge arrays previously, it does not do so now. This PR fixes it by cleaning up the payload before passing it for translation
These fixes are all auto generated and can be merged directly
Fixes the following issues
1. Event used on components should be hypenated
2. Attribute orders in components
3. Use `unmounted` instead of `destroyed`
4. Add explicit `emits` declarations for components, autofixed [using
this
script](https://gist.github.com/scmmishra/6f549109b96400006bb69bbde392eddf)
We ignore the top level v-if for now, we will fix it later
This PR allows migration of legacy GMail inbox users to new OAuth based
inbox
## How to test?
1. Create an inbox from the seed data and set it's IMAP address to
`imap.gmail.com` from the UI
2. Open `rails console` and run the following
```
inbox = Inbox.find(100) # use your inbox id here
channel = inbox.channel
channel.update(email: 'hello@chatwoot.com')
channel.prompt_reauthorization!
```
3. This will show the prompt on the UI. Once you click on Reauthorize,
it should open Google Auth. Reauthroize with the same email address as
used in the inbox and it should start working as usual
### Setting up ENV
```sh
GOOGLE_OAUTH_CLIENT_ID=<some-hash>.apps.googleusercontent.com
GOOGLE_OAUTH_CLIENT_SECRET=<client-secret>
GOOGLE_OAUTH_CALLBACK_URL="http://localhost:3000/omniauth/google_oauth2/callback"
```
This PR fixes the issue where proper error messages from the backend
were not displayed when an email already exists in the system during a
profile update, or when a phone number is already taken for Twilio
during the creation of a new account.
Fixes:
https://linear.app/chatwoot/issue/CW-3560/prod-customer-facing-issue-updating-email
This PR continues the design update series, updates the design for the custom attributes management page. This PR improves the interaction in the Add Custom Attribute feature. Now, the attribute model in the add attribute form will default to the currently selected tab.
---------
Co-authored-by: Sivin Varghese <64252451+iamsivin@users.noreply.github.com>
